Technical Data; Ec Declaration Of Conformity; Protecting The Environment - Black & Decker GKC1820L20 Manual

package. For this purpose we recommend the purchase of the
BLACK+DECKER saw chain sharpening kit, available from
your BLACK+DECKER service agents (cat. no. A6039).
Replacing worn out or damaged saw chains and guide
bars
Replacement saw chains are available through retailers and
BLACK+DECKER service agents (pt no A6158), replacement
guide bars are only available through BLACK+DECKER
service agents (pt no 90517720). To avoid the risk of injury,
use only original BLACK+DECKER chains and guide bars.
Always use genuine spare parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
Your tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this may
result in considerable danger to the user. We recommend you
keep this user manual in a safe place.
Storage
When the tool will not be used for several months, ideally
leave the battery (10) connected to the charger.
Otherwise proceed as follows:
Remove the battery (10) from the tool.
u
Fully charge the battery (10).
u
Store the tool and battery (10) in a secure and dry
u
location. The storage temperature must always remain in
the range of +10°C to +40°C. Place the battery (10) on a
level surface.
Before using the tool after prolonged storage, fully charge
u
the battery (10) again

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
18ο χλμ. Ν.Ε.Ο.Α.Κ. - Τηλ. 210 5573739
https://www.kipogeorgiki.gr
(Original instructions)

Technical data

GKC1820ST1 H1
Voltage V
DC
Chain speed (No-load)
min
-1
Weight kg
Battery
Voltage
V
DC
Capacity Ah
Type
Charger
Input Voltage V
DC
Output Voltage Ah
Output Current
mA
Guaranteed sound pressure level measured according to EN60745:
LpA (sound pressure) 83.0 dB(A), uncertainty (K) 3 dB(A)
LwA (sound power) 94.0 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a )= 4.3 m/s², uncertainty (K) = 1.5 m/s²
h

EC declaration of conformity

MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
GKC1820ST1, GKC1820L20 – Compact Chainsaw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60745-1:2009 +A11:2010, EN 60745-2-13:2009 +A1:2011
2006/42/EC, Chain Saw, Annex IV DEKRA Certification
B.V., Utrechtseweg 310, 6802 ED Arnhem, The Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to
2000/14/EC (Article 13, Annex III):
L (measure sound power) 94.0 dB(A)
WA
L (guaranteed sound power) 95.0 dB(A)
WA
These products also comply with Directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
ENGLISH
GKC1820L20 H1
18 18
190 190
2.0 2.0
BL2018ST BL2018
18 18
2 2
Li-Ion Li-Ion
906349** 905902** (Type 1)
200-240 100 - 240
8-20 8 - 20
1000 400
11