Operating Instructions Quartz Watch; Calibres: 1376, 1426, 1456, 1530, 1532, 4561, 4564 - Omega 1376 Operating Instructions Manual

1 Introduction
OMEGA International Warranty
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
To make a claim under this Warranty, we recommend that you wrap
your OMEGA
® watch carefully so as to avoid any damage and
send it by registered mail or drop it off in person to your nearest
official OMEGA retailer or an official OMEGA
®
To find current contact information for your nearest official OMEGA
retailer or official OMEGA
®
+61 3 8844 3300, email customer.service@swatchgroup.com.au
or go to www.omegawatches.com.
You will be responsible for paying the expenses associated with
making a claim under this Warranty, including postal or delivery
expenses and any relevant taxes.
OTHER CONDITIONS
No official OMEGA retailer or official OMEGA
®
is authorised to make any modification, extension or addition to this
Warranty. OMEGA SA provides no warranty against defects beyond
the rights and remedies given under this Warranty and which are
available under the Australian Consumer Law and the New Zealand
Consumer Guarantees Act 1993.
OMEGA are registered trademarks of OMEGA SA
® and ®
14
® Service Centre.
®
Service Centre, please telephone
® Service Centre
2 Operating instructions
Quartz watch
CALIbRES 1376, 1456 (fig. IV)
The crown has 2 positions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2. Time setting: pull the crown out to position 2, turn the crown
forwards or backwards. Push the crown back to position 1.
CALIbRES 1426, 1530, 1532, 4561, 4564
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned
against the case, the crown ensures that the watch is water-resistant.
2. Correcting the date: pull the crown out to position 2, turn the
crown forwards or backwards. Push the crown back to position 1.
3. Time setting: pull the crown out to position 3. The seconds hand
will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with
a given time signal.
(fig. I)
15