Table of Contents
Advertisement
SPIKE INSTALLATION GUIDE
Spikes are used to enhance performance of the prodigy5 and allow the
loudspeaker to be levelled perfectly.
Carefully invert the loudspeaker so that its base is uppermost. Take care not to
damage the top of the loudspeaker when it is upside-down, the use of a soft
cloth or another non-abrasive material is ideal is suggested.
The spikes can then be inserted and screwed into the M8 threaded hole.
Carefully re-invert the loudspeaker.
Once in position, level the loudspeaker by adjusting each spike in turn using a
spirit level on the top of the cabinet to confirm. While this might seem a time-
consuming exercise, it is important both in terms of system performance and
the stability of the loudspeaker.
The final step is to tighten each knurled collar/nut; this will ensure that the spike
and loudspeaker is as rigid as possible. Do not use tools as this may lead to
overtightening and damage.
!
Caution: The spikes are sharp,
treat them with care; they
may damage hard flooring
if in direct contact. We have
*
included
pucks to protect
sensitive or hard flooring.
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Advertisement
Table of Contents
