Table of Contents
Advertisement
Resonance-absorbing stand installation
Resonance damping stands are provided with spikes to enhance the performance
and stability of these models in the
Carefully invert the loudspeakers stand so that its base is uppermost. Take care
not to damage the top of the stand when it is upside-down; the use of a soft
cloth or square of carpet is suggested.
Screw the proprietary stand spikes into the M8 threaded inserts in the base of
the stand.
Rotate the stand so that spikes are on the floor,you are now ready to place
your stands in situe and finish the installation of your loudspeakers.
N.B. Do not over-tighten. Over-tightening the spikes, over tigthening of the
!
spikes will result in failure of the mounting inserts.
Caution: The spikes are sharp and should be treated with great care; they may
!
damage hard flooring if in direct contact.
series range.
Tip
Tip
Tip
Tip
Tip
Tip
Advertisement
Table of Contents
