Advertisement
Ventum One Disc User Manual
Congratulations on your purchase of the Ventum One Bike!
This document will guide you through the process of setting up your new bike and getting
out on the road. Of course, if you have any questions or if we can be of assistance in any
way, please contact the Ventum Concierge team at support@ventumracing.com. Before
you hit the road, please also take a moment to register your bike purchase via our website:
https://ventumracing.com/register-your-bike/
WARNING: Failure to follow these instructions could lead to serious injury or death
Seatpost clamp
▼ Insert the seat post into the frame. Ensure the minimum insertion depth of 10 cm
is achieved
▼ Torque the seat post clamp bolt to a minimum of 6 Nm Temperature, moisture, and
contaminants can affect the seat post clamp. If necessary, it can be torqued up to 8 Nm
▼ To remove or adjust the seat post, loosen the seat post clamp bolt. It is not necessary to
remove it from the clamp entirely. Simultaneously tap the tail and nose of the saddle with
your hands to disengage the clamp's grip on the seat post and permit adjustment. Push
or pull the seat post as required to achieve the desired saddle height
2
One Disc User Manual
Advertisement
