Replacing Windscreen Wiper Blades - Volvo S90 Owner's Manual

Replacing windscreen wiper
blades
The wiper blades sweep water away from the
windscreen. Together with washer fluid, they
aim to clean the windscreen and ensure visi-
bility while driving. The wiper blades can be
replaced.
Fold up the wiper arm when it is in service
position. Service position is activated/
deactivated via the function view in the
centre display when the car is stationary
and the windscreen wipers are not on.
Press the button located on the wiper
blade mounting and pull straight out paral-
lel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
3. Check that the blade is firmly installed.
4. Fold the wiper arm back towards the
windscreen.
The wiper blades are different lengths
MAINTENANCE AND SERVICE
NOTE
When replacing the wiper blades, note that
they have different lengths. The blade on
the driver's side is longer than on the pas-
senger side.
Related information
Using the rain sensor (p. 178)
•
Using windscreen and headlamp washers
•
(p. 179)
Using the rain sensor's memory function
•
(p. 179)
Filling washer fluid (p. 651)
•
Set the wiper blades in service position
•
(p. 650)
Using windscreen wipers (p. 177)
•
Wiper blades and washer fluid (p. 177)
•
649