Table of Contents
Advertisement
Quick Links
OPERATING MANUAL
VIS035.1 Battery Powered IP65 WR-5106 LED Fitting.
This versatile battery operated fitting is fitted with five 10watt Hex LED's using RGBAW+UV pixel
LED's. The fitting is IP65 rated for use outdoors. The unit is controlled manually or Infra-Red Remote
control, or via DMX. The unit is fitted with a wireless DMX which can operate up to 100metres
maximum (visible distance).
This manual is designed to give you the operations of the unit, please refer to the main product
manual for DMX values and detailed operation.
UNIT OPERATION;
The Rear Panel;
This contains the inlets and outlets for both mains power (mini IP65 4pin XLR) and DMX (mini IP65
3pin XLR). In addition is a Battery switch (coloured silver).
The Battery switch (Silver button) will connect or disconnect the batteries from the fixture, this helps
extend the battery life.
This switch must be switched ON for operating the light (switch depressed).
Advertisement
Table of Contents
Related Manuals for ViSAGE WR-5106
Summary of Contents for ViSAGE WR-5106
- Page 1 OPERATING MANUAL VIS035.1 Battery Powered IP65 WR-5106 LED Fitting. This versatile battery operated fitting is fitted with five 10watt Hex LED’s using RGBAW+UV pixel LED’s. The fitting is IP65 rated for use outdoors. The unit is controlled manually or Infra-Red Remote control, or via DMX.
- Page 2 The Display; Located on the side of the panel is the illuminated display panel and control switches. MODE SET UP DOWN The four switches read: FUNCTIONS: Listed below is a description of the functions available on the unit and what each of the keys will achieve.
- Page 3 5. MANUAL- this allows the user access to each of the six colours; Red, Green, Blue, White, Amber and Ultra Violet and Strobe rate as follows;- a. RED mode allows the red pixels to be dimmed up or down from 0-255 steps b.
- Page 4 DMX CHANNEL SETTINGS: The unit can be set to operate in either 6,7,8,11 or 12 channel operation as shown on the table below:- 6 Channel Operation: CHANNEL VALUE FUNCTION 0-255 0%-100% 0-255 GREEN 0%-100% 0-255 BLUE 0%-100% 0-255 WHITE 0%-100% 0-255 AMBER 0%-100%...
- Page 5 11 Channel Operation First 8 channels as before additional channels shown below 9- MODE Selection 0-51 Standard Dim Mode 52-102 Colour Macro Mode (Ch8) 103-153 Colour Jump Mode (Ch8) 154-204 Colour Fade Mode (Ch8) 205-255 Auto Run Mode (Ch8) 10- Multiple Functions 0-51 No Function 52-102...
- Page 6 You will require a 6 channel IR remote control. The remote control will enable the user to access the pre-programmed patterns which are found in the MENU section of the LED fitting. OPERATION. Ensure the LED Battery light has IR switched to the ON status (see above in the introduction to the IR section of this manual).
- Page 7 Colour Change. Press PROG you will see that the display will read either JUMP RUN, FADE RUN, or CLR MACS. By pressing the PROG key you can select either JUMP RUN or FADE RUN or CLR MACS. JUMP RUN – Will allow you to step chase colours, there are 16 pre-programmed patterns which can be accessed using the + or –...
- Page 8 SPECIFICATIONS:- Weight: 3.5Kg Dimensions; 240mm x 165mm x 280mm Power Input: AC 100v-240v, 50Hz-60Hz Wattage: 56watts LED’s : 5 pieces 10watt RGBAW+UV (6in1 pixel) Beam Angle: 25degree IP Rating: 65 Display: 2 x 8 character LCD Control: IR Remote and Wireless DMX Control available Power cord daisy chain for charging: Must not exceed 10 units Power Connections: Mini IP 3pin DMX inlet and outlet, Mini IP 4pin power inlet and outlet Number of Lithium Ion Cells: 12...
Need help?
Do you have a question about the WR-5106 and is the answer not in the manual?
Questions and answers