Parameter Description - Jinhan JDS2012Q Manual

After editing the number (currently supports up to 30 groups of waveforms from 0-29), press ok
to save.
After the waveform is saved, you can view the currently saved waveform in the set waveform
browser.
In this interface, you can see the preview of the saved waveform, and at the same time, you can
choose to view the waveform with the OK key.
All the data of the waveform will be copied to the oscilloscope, and the oscilloscope can perform
arbitrary operations on the waveform.

Parameter Description:

Oscilloscope parameters
Number of channels
Maximum real-time sampling rate
Bandwidth
Vertical resolution
Vertical gear
Impedance
1
Single channel CH1 200MSa/s
Single channel 50M
8Bit
10mV - 5V (Probex1), 100mV - 50V (Probex10)
1,2,5 stepping
1MΩ, 25pF