Jinhan JDS2012Q Manual page 23

Coupling
Display mode
Input voltage
Time base range
Storage depth
Trigger mode
Trigger type
Automatic detection
Cursor measurement
Can record contrast waveform
Screenshot function
Self-calibration
Number of screenshots available
Number of waveforms that can be saved
Multimeter parameters
Count value
DC voltage
AC voltage
Resistance
Capacitance
Diode
On-off detection
DC, AC
Y-T
40V (Probex1); 400V(Probex10);
Use high-voltage probes, the maximum voltage
is determined by the quality of the probe.
12.5ns - 5s, 100ms - 5s, scan mode(scan)
Per channel 3K
Automatic, normal and single
Rising edge, falling edge
50Hz - 20MHz
Time, voltage, current, pressure (manual
mode)
2
stand by
stand by
7
30
4000 count
0 - 1000V (CAT II area)
0 - 750V (CAT II area)
0 - 40MΩ
0 - 100μF, (At 100μF, the charging time is
more than 30 seconds)
0 - 1.5V
Sound when lower than 30Ω