Hisense 55U8K Quick Setup Manual page 7

Power indicator
Power button
(Standby/Source)
SERIAL
ANT/CABLE
HDMI
AV IN
HEADPHONE /
RESET
USB
LAN
DIGITAL AUDIO OUT
The light is white in standby mode.
When the TV is in standby mode, quick press the power button,
and TV will be turned on.
When the TV is on, quick press the power button to call up the
menu:
• Quick press to change the selection.
• Long press to confirm your selection.
Service use only.
Connect an outdoor VHF/UHF antenna.
Connect a High Definition Multimedia Interface (HDMI) cable from
an external device.
Connect a composite video cable and left-right audio cables from
an external AV device.
Connect headphones to hear audio from the TV. Headphones
with microphones are not supported.
Power off / restart (quick press)
Reset your TV back to the factory setting (long press for 5
seconds)
Connect a USB device for browsing photos, music and movies.
The rate of speed of USB 3.0 port 10 times faster than the USB 2.0
port.
NOTE: You can still plug a USB 2.0 device into a USB 3.0 port;
however, the rate of speed will not be as fast. USB 3.0 devices
are also backwards compatible with USB 2.0 ports.
Connect an Ethernet cable to access a network or the Internet.
The TV also has a wireless connectivity feature.
Connect an optical cable from an external digital audio system.
5