Advertisement
HOW TO USE
Note: This epilator operates in corded mode only.
Before epilating, make sure your skin is clean, dry and free from creams or
oils. Ensure that the On/Off switch is in the Off position. Turn the epilator
on ensuring that you press the switch lock in with your thumb. Set to the
desired speed. Low speed is recommended for fine hair and High speed is
recommended for course hair or stronger hair growth.
Using your free hand, hold the skin taut so that the
hairs stand upright. Position the epilator so that
the stainless steel discs are at a 90º angle and flat
against the skin. The Remington
epilator attachment
®
heads are designed to ensure maximum contact
to the skin to maximise the hair removal process.
(Diagram A)
Glide the epilator in a slow continuous movement
against the hair growth. Do not apply pressure as the
epilator will slow down or even stop. Repeat until all
unwanted hair is removed. After epilating, turn the
epilator Off.
Arm/Leg Epilation
Begin by epilating from the lower arm or leg and
slowly move upwards. To epilate behind the elbow or
knee keep the arm or the leg straight to stretch the
skin. (Diagram B)
Underarm and Bikini Line Epilation
Please be aware that these areas are particularly
sensitive to epilation. However this sensitivity will
reduce after repeated usage. For more comfort,
ensure that the skin is held taut and the hair is at the
optimum length of 2-5mm.
When epilating the underarm keep your arm raised so
that the skin is stretched. Directly after epilation avoid
using irritating substances, such as deodorants with
alcohol. (Diagram C)
When epilating the bikini line hold the skin around the bikini line area taut,
and glide the epilator in a circular motion. (Diagram D)
7
Advertisement
