Honeywell HF8CESWK5 User Manual page 13

INSTALLATION (CONTINUED)
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
3. Connect the hose to the rear exhaust outlet on the back of the unit. Slide in the hose connector,
then rotate clockwise until it is locked in place.
4. Connect the window bracket to the window bracket panel adapter. Ensure that all connections are
tight and installed properly.
5. Measure and cut the Insulation Tape
Peel off the adhesive backing and slowly attach them to the window sash and frame.
Horizontal Sliding Window
(adhesive) to the full length of your window sash and frame.
Window Sash
EN 5
Hose:
Dia. 5.9" (15 cm)
Length: 10.6" to 59" (27 cm to 150 cm)
Window Sash
Vertical Sliding Window