Table of Contents
Advertisement
Available languages
Available languages
CLEANING & MAINTENANCE (CONTINUED)
End of Season Storage & Maintenance:
If the appliance will not be used for a long time, follow these steps:
1.
Be sure to drain the left-over water condensation. Remove the lower drain plug and use a
shallow pan to collect the water (make sure to replace the drain plug when finished).
2.
To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.
3.
Turn off and unplug the air conditioner from the power supply.
4.
Remove the dust filter and clean with water. Dry the dust filter and then reinstall.
5.
Disconnecting the Window Installation Kit:
•
Remove the Exhaust Hose from the unit by rotating anti-clockwise to unlock the knob
mechanism then sliding out.
•
Remove the window bracket panel adapter from the window bracket by rotating anti-clockwise
then pulling away.
•
It is recommended to store the Window Kit parts in a bag together with the Remote Control
and placing them together with the air conditioner unit.
•
If needed, you can clean the Window Kit with a damp cloth and water before storing.
Make sure all parts of the Window Kit are dry before storage.
6.
It is recommended to coil the power cord before storing to ensure the cord is protected from
bents and creases.
7.
Do not store the appliance covered with plastic bags.
EN
12
Advertisement
Table of Contents
