Honeywell MN1CFS8 User Manual page 11

INSTALLATION (CONTINUED)
2. The Window Brackets are approximatley 19.7" (50 cm) each, allowing you to install to windows
and balcony doors of different heights or width.
Adjustable Knobs
To install the window bracket to the window frame, you need to adjust the height or width of the
window bracket by extending the length according to the height or width of the window. When the
length is set, tighten the Adjustable Knobs (preinstalled on the window bracket) to ensure the window
bracket is secured in the desired position. Use one or all three pieces of window bracket as needed.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
3. Connect the Exhaust Hose to the rear exhaust outlet on the back of the unit. Slide-in the Hose
Connector from left to right. Rotate clockwise to ensure the knob mechanism is locked in place.
Anticlockwise to unlock the knob mechanism.
19.7" (50 cm)
1 part
EN 4
19.7" (50 cm) to
38.2" (97 cm)
2 parts
47.2" (1.2 m)
3 parts