Intec CV40 Instruction Manual page 9

2.3 Electronic System Overview and Specifications
Your new pool ionization system has gone through two separate inspections: (a) by
manufacturing, and then, (b) by the shipping department. If you notice any defects on your
system, please contact our Quality Assurance Department immediately.
Your unit is powered by 110-220 volts (50-60 hertz) and can be plugged into any
standard electrical socket. New modern pool system controller have auxiliary plugs/ports that
can be programmed to the ionizer turn on and off. Copper ions remain active for a long period
of time and you should not have to run the system continuously. These control units may also
be plugged into a timer (available at hardware stores) for maintaining a copper residual. The
use of an extension cord will not affect this system.
9