Assemble Guide
(5-1) Insert the Head into the Stand.
※ Be careful not to fit the DC Cable between the Head and the Stand. (If necessary, fix the DC Cable with tape before inserting the Head.)
(5-2) Screw the Shaft(C) 4EA.
※ If the head of the shaft does not protrude from the stand surface, it is normally fastened.
5-1
5-2
C
C
C
Caution Cable
C
C
If necessary, fix the DC Cable with tape
before inserting the Head.
※ The head of the shaft does not protrude
from the stand surface.
Copyright © 2021 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.