Working Guide
(7-1) Unscrew the Power Box Fixation Screw(E) 3EA on the back of the Stand.
(7-2) Separate the Power Box from Stand by pulling the DC Cable and the Power Code Cable.
※ Pull out gently while pulling the left and right simultaneously to avoid damage or missing the cable.
7-1
E
7-2
E
E
Power Box
※ As follows, When re-assembling the Power Box
Make sure that the Guide Pem-nut on the Power Box is inserted
into the Stand inner Guide Rail.
For normal assembly, the left and right sides must be inserted to the
end at the same time.
Copyright © 2021 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.