Assemble Guide
(6-1) Tighten the Sound Reflector. (Attached with magnet)
※ Check the DC Cable clearance before the Sound Reflector tightening. The Sound Reflector does not tighten properly if the DC Cable is protruding.
(6-2) Screw the Sound Reflector Fixation Screw(B) 2EA
6-1
Sound Reflector
6-2
Sound Reflector
※ Be careful not to scratch inside the stand when Sound reflector is assembled to Stand.
Reflector attached by magnet.
B
※Check the DC Cable before assemble Reflector to Stand.
Cable protrudes to the outside (NG)
Copyright © 2021 LG Electronics. Inc. All rights reserved.
Only for training and service purposes.
Cable does not protrude
to the outside (OK)