LG B4 Series Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OWNER'S MANUAL

Safety and Reference

Please read this manual carefully

before operating your set and retain

it for future reference.

OLED42C4AUA

OLED65B4AUA

OLED42C4PUA

OLED65B4PUA

OLED48B4AUA

OLED65C4AUA

OLED48B4PUA

OLED65C4PUA

OLED48C4AUA

OLED65G4SUB

OLED48C4PUA

OLED77B4AUA

OLED55B4AUA

OLED77B4PUA

OLED55B4PUA

OLED77C4AUA

OLED55C4AUA

OLED77C4PUA

OLED55C4PUA

OLED77G4WUA

OLED55G4SUB

OLED83C4AUA

The model and serial number of the product are

located on the back and on one side of the product.

Record them below in case you ever need service.

Model

Serial No.

*MFL720617592312REV00*

(Only OLED42/48/55/65/77/83C4*,

OLED48/55/65/77B4*)

(For USA)

increase power consumption that could exceed

the limits necessary to quality for ENERGY STAR.

Refer to ENERGY STAR.gov for more information

on the ENERGY STAR program.

OLED83C4PUA

OLED83G4WUA

OLED97G4WUA

This product qualifies for ENERGY

STAR in the factory default setting.

Changing the factory default settings

or enabling other features may

Supplier`s Declaration of

Conformity

Trade Name

Responsible

LG Electronics USA,

Party

Inc.

Address

111 Sylvan Avenue,

North Building,

Englewood Cliffs,

NJ 07632

E-mail

lg.environmental@

lge.com

LG Customer Information Center

For inquires or comments, visit www.

lg.com or call;

USA, Consumer

1-800-243-0000

User

USA, Commercial

1-888-865-3026

User

1-888-542-2623 CANADA

www.lg.com

Printed in Korea

Table of Contents

Summary of Contents for LG B4 Series

Page 1 Printed in Korea Copyright © 2024 LG Electronics Inc. All Rights Reserved. (Only OLED42/48/55/65/77/83C4*, OWNER’S MANUAL OLED48/55/65/77B4*) (For USA) Safety and Reference This product qualifies for ENERGY STAR in the factory default setting. Please read this manual carefully Changing the factory default settings...
Page 2: Important Safety Instruction
By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).
Page 3 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Page 4: Installation
• Use only an authorized attachments / accessories approved by LG • Do not press strongly upon the panel with a hand or a sharp object such Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
Page 5: Mounting To The Wall
• If you install the TV on a stand, you need to take actions to prevent the The LG wall mount is easy to adjust or to connect the cables. When you do product from overturning. Otherwise, the product may fall over, which not use LG’s wall mount bracket, use a wall mount bracket where the device...
Page 6: Before Installation
LG is not responsible for problems caused by improper installation of the individual situation, so you should check with a local professional.
Page 7: Turning On The Tv
Starting TV Turning on the TV <A type> Power On (Press) You can simply operate the TV functions, using the button. (Depending upon model) Power Off (Press and Hold) Menu Control (Press Menu Selection (Press and Hold 1) All running apps will be closed. 2) You can access and adjust the menu by pressing the button when TV is on.
Page 8: External Devices
To obtain the RS-232C external control setup information, please visit www. → [HDMI Deep Color] lg.com. Download and read the manual, (Depending upon model). • Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
Page 9: Specifications
Specifications Power requirement AC 120 V~ 50/60 Hz Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
Page 10: Product Information
2,400 to 2,472 MHz 17 dBm other relevant documents please visit https://opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a 5,150 to 5,725 MHz 15 dBm charge covering the cost of performing such distribution (such as the cost of 5,725 to 5,850 MHz...
Page 11: Troubleshooting
Troubleshooting In TV / HDMI input, press the button on the remote control three times to display the model name and serial number on the screen. Cannot control the TV with • Check if anything such as tape has been placed over the receiver. the remote control.
Page 12 Precautions for Protecting the OLED TV Screen Recommendations for Minimizing Unlike regular LED/LCDs, OLED TVs produce images that emit light for each pixel, achieving a perfect black color and delivering clear images without Image Retention blurring. When watching the TV for a long time, press the button on the remote Due to the nature of the organic materials used to achieve high-resolution ] →...
Page 13 Regulatory...
Page 14 If the existing television set is going to be retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current (AC). Refers to stand-by. Refers to direct current (DC). Refers to “ON” (power). Refers to class II equipment. Refers to dangerous voltage. LG Take-back & Recycling Policy...
Page 17: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
Page 18: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
Page 19 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
Page 20 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
Page 21: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
Page 22: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
Page 23 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
Page 24 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
Page 25 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
Page 26 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
Page 27 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
Page 28 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.

LG B4 Series Owner's Manual

Quick Links

Related Manuals for LG B4 Series

Summary of Contents for LG B4 Series

This manual is also suitable for:

Table of Contents