LG OLED48A2PUA Owner's Manual

LG OLED48A2PUA Owner's Manual

Hide thumbs Also See for OLED48A2PUA:

Advertisement

OWNER'S MANUAL
Safety and Reference
Please read this manual carefully before
operating your set and retain it for
future reference.
OLED48A2AUA
OLED55B2PUA
OLED48A2PUA
OLED65B2PUA
OLED55A2AUA
OLED77B2PUA
OLED55A2PUA
OLED65A2AUA
OLED65A2PUA
OLED77A2AUA
OLED77A2PUA
The model and serial number of the product are
located on the back and on one side of the product.
Record them below in case you ever need service.
Model
Serial No.
*MFL718561322201REV00*
OLED42C2AUA
OLED42C2PUA
OLED48C2AUA
OLED48C2PUA
OLED55C2AUA
OLED55C2PUA
OLED65C2AUA
OLED65C2PUA
OLED77C2AUA
OLED77C2PUA
OLED83C2AUA
OLED83C2PUA
www.lg.com
Printed in Korea
Copyright © 2022 LG Electronics Inc.
All Rights Reserved.
Supplier`s Declaration of
Conformity
Trade Name
LG
Responsible
LG Electronics USA,
Party
Inc.
Address
111 Sylvan Avenue,
North Building,
Englewood Cliffs,
NJ 07632
E-mail
lg.environmental@
lge.com
LG Customer Information Center
For inquires or comments, visit www.
lg.com or call;
USA, Consumer
1-800-243-0000
User
USA, Commercial
1-888-865-3026
User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG OLED48A2PUA

  • Page 1 Printed in Korea Copyright © 2022 LG Electronics Inc. OWNER’S MANUAL All Rights Reserved. Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. OLED48A2AUA OLED55B2PUA OLED42C2AUA OLED48A2PUA OLED65B2PUA OLED42C2PUA OLED55A2AUA...
  • Page 2: Important Safety Instruction

    By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration (Canada).
  • Page 3 Warning! Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 4: Installation

    • Use only an authorized attachments / accessories approved by LG • Do not press strongly upon the panel with a hand or a sharp object such Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
  • Page 5: Mounting To The Wall

    We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
  • Page 6 Starting TV Turning on the TV <B type> You can simply operate the TV functions, using the button. Power On (Press) Power Off (Press and hold) <A type> Power On (Press) Power Off (Press and Hold) Volume Control Menu Control (Press Menu Selection (Press and Hold Channels Control 1) All running apps will close.
  • Page 7 To obtain the RS-232C external control setup information, please visit www. • For an optimal connection, HDMI cables and USB devices should have lg.com. Download and read the manual, (Depending upon model). bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.
  • Page 8: Specifications

    Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). •...
  • Page 9: Product Information

    5,150 to 5,725 MHz 15 dBm LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of 5,725 to 5,850 MHz 15 dBm media, shipping, and handling) upon email request to opensource@lge.com.
  • Page 10: Troubleshooting

    Troubleshooting Cannot control the TV with • Check if anything such as tape has been placed over the receiver. the remote control. • Check if there is any obstacle between the product and the remote control. • Replace the batteries with new fresh ones. No image display and no •...
  • Page 11 Precautions for Protecting the OLED TV Screen Running [Pixel Cleaning] to Protect the Unlike regular LED/LCDs, OLED TVs produce images that emit light for each pixel, achieving a perfect black color and delivering clear images without OLED TV Screen blurring. The OLED TV is equipped with a pixel cleaning feature to check the status of Due to the nature of the organic materials used to achieve high-resolution the screen by itself and prevent image retention.
  • Page 12 Regulatory and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product.
  • Page 13: Note To Cable/Tv Installer

    If the existing television set is going to be retained and relocated, the same considerations as above should be applied. Symbols Refers to alternating current (AC). Refers to stand-by. Refers to direct current (DC). Refers to “ON” (power). Refers to class II equipment. Refers to dangerous voltage. LG Take-back & Recycling Policy...
  • Page 16: Child Safety

    CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
  • Page 17: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
  • Page 18: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 19 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 20 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 21 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 22 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 23 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 24 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 25 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 26 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 27 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 28 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.

Table of Contents