Table of Contents
Advertisement
10. ERROR CODE MEMORY FUNCTION
1. General description
This unit is equipped with history of error code memory function,
and can be memorized 32 error codes in sequence from the latest.
When the error is occurred more than 32, oldest error is
overwritten in sequence.
The error code is not memorized when the power supply is shut
down forcibly (when the unit is powered on by the battery, the
battery is pulled out) because the error code is memorized to
FLASH ROM when the unit is powered off.
2. How to display
The error code can be displayed by the following procedure:
Before perform the error code memory function, connect the AC
adaptor or insert the battery, and insert the SD card.
- 1. The temporary cancellation of factory setting:
Set the mode dial to " [P] (Red mark)".
While pressing [Burst] and " [UP] of Cross key"
simultaneously and hold them, turn the Power on.
16
Advertisement
Table of Contents
