Panasonic Lumix DMC-FZ10PP Service Manual page 4

NOTE:
After replacing the MAIN C.B.A., be sure to achieve adjustment.
The adjustment instruction is available at "software download" on
the "CS-Web from AVC" web-site in "TSN system", together with
Maintenance software.
1.4.2. INITIAL SETTINGS:
When you replace the Main C.B.A. be sure to perform the initial settings after achieving the
Adjustment, by ordering the following procedure in accordance with model suffix.
- Step 1. The temporary cancellation of factory setting:
Set the mode dial to " [P] (Red mark)".
While keep pressing [Burst] and " [UP] of Cross key"
simultaneously, turn the Power on.
- Step 2. The cancellation of factory setting:
Set the mode dial to " [Playback] ".
While keep pressing [Burst] and " [UP] of Cross key"
simultaneously, turn the Power off.
- Step 3. Turn the Power on:
Set the mode dial to " [P] (Red mark)", and then turn the Power
on.
- Step 4. Display the INITIAL SETTING:
While keep pressing [MENU] and " [RIGHT] of Cross key"
simultaneously, turn the Power off.
4