Related Manuals for Franke MINERVA
Summary of Contents for Franke MINERVA
- Page 1 Assembly And instructions FrAnke minervA 3-in-1 kettle tAp Retain for reference nB: For use only with Franke Heating Tank...
-
Page 2: Package Contents
The Kettle Tap is suitable for dispensing boiling water (100°C) and hot and cold water. The connections of the mixer section can be connected with filter valves directly to the hot and cold water mains. The boiling water hose of the Kettle Tap should be directly connected to the Franke Heating Tank. See Heating Tank Installation Manual. - Page 3 4. Open the boiling water tap. 5. Wait until water flows from the tap. 6. Let the water flow for 3 minutes until clear water flows from the tap. 7. Check for leaks, rectify as necessary. Continue with the installation of the Franke Heating Tank.
- Page 4 operAtion oF tHe boilinG WAter centrAl knob When you start using the Kettle Tap, always flush a cupful of residual water prior to making tea or coffee. This will eliminate the air bubbles from the surface water of your drink. caution: The tap delivers boiling water (at 100˚C) at all times, and care should be taken to avoid scalding.
-
Page 5: Maintenance
SoluTIon Water leak Connection leak Tighten connection or replace it Tap does not supply boiling water Check Franke Heating Tank installation instructions Kettle Tap does not supply water Check whether mains water valve and pressure relief valve are open. Alternatively please contact the... -
Page 6: Guarantee Terms And Conditions
Franke UK Limited. This guarantee is in addition to and does not affect your statutory rights.
Need help?
Do you have a question about the MINERVA and is the answer not in the manual?
Questions and answers