Hisense 55U6K Quick Setup Manual page 6

Attach the wall mount bracket (not included)
Before you begin the third-party
manufacturer instructions, be sure to do
the following things:
1. Place the TV face down on a clean,
safe and cushioned surface.
2. Remove the TV stand if you have
already attached it.
3. Place spacers (not included) in the
corresponding bracket holes.
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• When you attach the mount, be sure to use spacers (provided by the third-party
manufacturer) between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
to use fixing screws (not included) that are 9.5 - 11.5 mm in length when measured
from the attaching surface of the rear cover.
9.5 - 11.5 mm
Wall mount bracket
Screw
Spacer
Rear cover of the TV
• We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains
parallel to the wall and does not lean forward.
NOTE:
• If installed on a ceiling or slanted wall, or the television installed is not parallel to the
wall, the television may fall and result in property damage or severe personal injury.
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket model.
400 × 200 (55")(139.7cm)
Wall mount hole
400 × 300 (65")(165.1cm)
pattern(mm)
400 × 400 (75")(190.5cm)
Wall mount
M6
screw size
4
Spacer
Bracket
(not included)
(not included)
TV
screen
Screw
(not included)
Vertical
surface