Advertisement
Attach the front opacity shield to where the air vents are located on the front
of the chassis and fasten the captive screws on the opacity shield.
Applying tamper evidence labels
Make sure the ambient air is above 10°C (50°F).
!
Clean the chassis before applying tamper evident labels. Alcohol-based
cleaning pads are recommended.
Apply tamper evidence labels to all removable components on the device.
Two tamper evidence labels are provided with the FIPS enclosure
assembly.
Apply tamper evidence labels as shown in the figures.
Documentation
To access documentation and support services, go to the Hewlett Packard
Enterprise Support Center website:
www.hpe.com/support/hpesc
5998-3567R
Advertisement
