Table of Contents
Advertisement
B. Reduced Air Flow
Installation of the equipment in a rack should be such that the amount of air flow required
for safe operation of the equipment is not compromised. To ventilate the system normally
and avoid overheating, leave at least 1 inch (2.5 cm) on each side of the HCS6150R unit.
Do NOT stack other equipment on the top of the HCS6150R unit.
C. Circuit Overloading
Consideration should be given to the connection of the equipment to the supply circuit and
the effect that overloading of the circuits might have on overcurrent protection and supply
wiring.
D. Reliable Earthing
Maintain reliable earthing of rack-mounted equipment. Particular attention should be given
to supply connections other than direct connections to the branch circuit (e.g. use of
power strips).
E. Mains Outlet Earthing
The apparatus with Class I construction must be connected to a mains socket outlet with
a protective earthing connection.
Front View
of Rack Cabinet
206-4138
Rack Installation (Cont.)
1 inch
minimum
1 inch minimum
13
Advertisement
Table of Contents
