19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea MB8811C0 Bluetooth Adapter Card User Guide Version 1.1 July, 2013...
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea Revision History Release Date Revision Initials 2013-07-11 First release.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea STATEMENT and Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea 「依據低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均 不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干 擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機 設備之干擾。」 任一平台若裝置本模組，其平台標籤須標示 “內建藍芽模組 NCC:XXXXXXXXXXX” This device is intended only for OEM integrators under the following conditions: The antenna must be installed such that 20 cm is maintained between the antenna and users, and ...
19-1, Cheongho-ri Jinwi-myeon, Pyeongtaek-si,Gyeonggi-do, 451-713, Korea End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: BEJ9QK-DMMB8811C0”, “contains IC: 2703H-DMMB8811C0”.
MB8811C0 Bluetooth Adapter Card Package Contents The following items should be found in your package: MB8811C0 Bluetooth Adapter Card Conventions: The ‘Module’ mentioned in this user guide stands for MB8811C0 Bluetooth Adapter Card without any explanation.
MB8811C0 Bluetooth Adapter Card! 1.1 Overview of the Product MB8811C0 is a fully integrated Bluetooth module. It is based on CSR’s Bluecore 8811 chip with specific interface design to meet LG Electronics’s needs. MB8811C0 is compatible with Bluetooth specification version 4.0. It integrates RF, Baseband controller, etc., a completed Bluetooth subsystem.
2.2 Software Installation For the Consumer Electronics products, the Linux Driver of MB8811C0 is embedded in default. So the module is a plug and play device. After connecting the module to the device, MB8811C0 will work well.
MB8811C0 Bluetooth Adapter Card 2.3 Pin Definitions Pin Name Description Positive Input for the internal regulator (3.0 ~ 3.6V) Reset if low. Input debounced so must be low for >5ms to RESET cause a reset Bluetooth UART Request to Send. Active-low request.
MB8811C0 Bluetooth Adapter Card 2.4 Mechanical Dimension...
MB8811C0 Bluetooth Adapter Card Appendix A: Specifications Normal Interface UART Operating System Windows XP, Vista, 7, Linux Radio Data Rate Up to 3Mpbs GFSK, π/4 DQPSK, 8DPSK Modulation Frequency 2.402 ~ 2.480GHz Channel Number 11 for BLE, 79 for BT4.0...