Table of Contents
Advertisement
Available languages
Available languages
•
Close the appliance (fig. C3).
•
Insert the mains plug into the wall socket.
•
Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(2) comes on. The appliance starts heating.
•
Wait until the baking plates (4) have
reached the required temperature.
The temperature indicator (2) goes off.
The appliance is ready for use.
•
Take one of the following actions:
Open the appliance for use in the 90°
mode (fig. C1). Place the food onto the
lower baking plate (4). Place an empty
drip tray (6) under the drainage point
(5) of the baking plate (4) (fig. C1).
Open the appliance for use in the 180°
mode (fig. C2). Place the food onto both
baking plates (4). Place an empty drip
tray (6) under the drainage point (5) of
each baking plate (4) (fig. C2).
Note: If you want to grill food when the
appliance is closed, place the food onto the
lower baking plate before closing the
appliance.
•
Grill the food until it is ready for
consumption. The required time depends
on your wishes. Small pieces will grill or fry
better and more quickly than large pieces.
Experiment with the required time to
achieve the best results.
•
Stay close to the appliance in order to
check from time to time whether the food
is ready and to make sure that the food
does not burn.
•
Turn meat and fish using a flat wooden or
plastic spatula only once in order to
prevent them from drying out.
•
Remove the food from the baking plate (4)
using a flat wooden or plastic spatula.
•
Close the appliance to retain the heat for
further use.
•
After use, remove the mains plug from the
wall socket and wait until the appliance
has cooled down.
Making pancakes (fig. A - C)
•
Prepare the pancake batter.
•
Place the appliance on a stable and flat
surface.
•
Make sure that the baking plates (4) are
properly mounted. If necessary, clean the
baking plates (4) with a damp cloth.
•
Close the appliance (fig. C3).
•
Insert the mains plug into the wall socket.
•
Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(2) comes on. The appliance starts heating.
•
Wait until the baking plates (4) have
reached the required temperature.
The temperature indicator (2) goes off.
The appliance is ready for use.
•
Open the appliance for use in the 180°
mode (fig. C2).
•
Pour the pancake batter onto both baking
plates (4).
•
Place an empty drip tray (6) under the
drainage point (5) of each baking plate (4)
(fig. C2).
•
Bake the pancakes until they are ready for
consumption. The required time depends
on your wishes. Experiment with the
required time to achieve the best results.
•
Stay close to the appliance in order to
check from time to time whether the
pancakes are ready and to make sure that
the pancakes do not burn.
•
Remove the pancakes from the baking
plate (4) using a flat wooden or plastic
spatula.
•
Close the appliance to retain the heat for
further use.
•
After use, remove the mains plug from the
wall socket and wait until the appliance
has cooled down.
Cleaning and maintenance
The appliance must be cleaned after each use.
Before you proceed, we need you to pay
attention to the following notes:
Before cleaning or maintenance, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
Do not immerse the appliance in water or
other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
12
Advertisement
Table of Contents
