Hints For Use - Nova 110201 Manual

­ Repeat the above steps to mount the
other baking plate.
• To remove the baking plates:
­ Slightly pull the clamp (10).
­ Raise the baking plate (4) with the side
with one recess (8) from the clamp (10).
­ Release the clamp (10).
­ Pull the baking plate (4) with the side
with two recesses (7) from the clamps
(9).
­ Repeat the above steps to remove the
other baking plate.
Use
Switching on and off (fig. A)
The appliance is equipped with a thermostat
that keeps the baking plates at the required
temperature.
• To switch on the appliance, insert the
mains plug into the wall socket.
• Turn the thermostat dial (1) to set the
required temperature. The temperature
indicator (2) remains on while the
thermostat heats the heating elements.
The temperature indicator (2) goes off
when the heating elements have reached
the required temperature.
• While the appliance is switched on, the
temperature indicator (2) will illuminate
and extinguish as the thermostat switches
the heating elements on and off to
maintain the required temperature.
• To switch off the appliance, remove the
mains plug from the wall socket.
Setting the temperature (fig. A)
• Turn the thermostat dial (1) clockwise to
increase the temperature of the baking
plates (5).
• Turn the thermostat dial (1)
counterclockwise to decrease the
temperature of the baking plates (5).

Hints for use

Before you proceed, we would like you to
focus your attention on the following notes:
­ Do not let metal cutlery touch the baking
plates to prevent damage to the non­stick
coating.
Making sandwiches (fig. A - C)
• Prepare the sandwich.
• Place the appliance on a stable and flat
surface.
• Make sure that the baking plates (4) are
properly mounted. If necessary, clean the
baking plates (4) with a damp cloth.
• Close the appliance (fig. C3).
• Insert the mains plug into the wall socket.
• Turn the thermostat dial (1) to set the
temperature. The temperature indicator
(2) comes on. The appliance starts heating.
• Wait until the baking plates (4) have
reached the required temperature. The
temperature indicator (2) goes off. The
appliance is ready for use.
• Open the appliance for use in the 90°
mode (fig. C1).
• Place the sandwich onto the lower baking
plate (4).
• Close the appliance (fig. C3).
• Place an empty drip tray (6) under the
drainage point (5) of the baking plate (4)
(fig. C1).
• Grill the sandwich until it is ready for
consumption. The required time depends
on your wishes. Experiment with the
required time to achieve the best results.
• Stay close to the appliance in order to
check from time to time whether the
sandwich is ready and to make sure that
the sandwich does not burn.
• Open the appliance when the sandwich is
ready.
• Remove the sandwich from the baking
plate (4) using a flat wooden or plastic
spatula.
• Close the appliance to retain the heat for
further use.
• After use, remove the mains plug from the
wall socket and wait until the appliance
has cooled down.
Grilling food (fig. A - C)
• Prepare the food.
• Place the appliance on a stable and flat
surface.
• Make sure that the baking plates (4) are
properly mounted. If necessary, clean the
baking plates (4) with a damp cloth.
11