Maintenance Menu - Garmin GI 275 Maintenance Manual

2.3.8

Maintenance Menu

Config Mode Fast Sync
Configure this setting on to expedite maintenance log downloads to a USB drive.
Export Logs
The GI 275 has maintenance and error logs that can be downloaded to a USB drive with the following
procedure:
1. Power on all GI 275s in the system in Configuration mode.
2. Insert a USB drive into the USB dongle or optional GSB 15 and wait for the GI 275 to recognize
the drive (a USB icon will appear in the bottom-left of the screen).
3. Navigate to the Maintenance page.
4. Touch the Export Logs button.
5. Touch the Download Log button and select the log type to download: Assert, Flight Data, Aircraft
Report, or Fault Log.
a. If Flight Data was selected, touch the Download Log Style button and select All or From
Date. If From Date was selected as the Log Style, enter the date in the fields below.
6. Touch the Start Download button and then the Begin Download button.
7. Once the save process is completed, disconnect the USB drive and insert it into a computer.
8. On the computer, navigate to the USB drive and open the "maintenance_logs" directory.
9. Open the .htm file.
10. The file should open in your computer's Internet browser and can be printed using your selected
Internet browser print function (in most cases, pressing Ctrl + P buttons simultaneously will
access this function).
The maintenance log will display reported system faults. The alert message that is displayed on the GI 275
for that fault (if any) will display frequency, most recent occurrence time of the fault, and any additional
information about the fault that might be helpful. If any faults are reported on the maintenance log, refer to
the troubleshooting flowcharts contained in Section 4.3.
Export Config
Export configuration settings via USB. Refer to Section 2.3.7 for procedure.
Export External LRU Logs
1. Power on all GI 275s in the system in Configuration mode.
2. Power on all LRUs in the system.
3. Insert a USB drive into the USB dongle or optional GSB 15 and wait for the GI 275 to recognize
the drive (a USB icon will appear in the bottom-left of the screen).
4. Navigate to the Maintenance page.
5. Touch the Export External LRU Logs button. The available logs will automatically download.
Exported logs can be viewed and printed using a computer's web browser.
Logging Options
This gives the option to enable or disable the logging of flight data during operation. The default is
Enabled.
190-02246-C2
Rev. 3
GI 275 Part 27 AML STC Maintenance Manual
Page 2-10