Import Configuration; Export Configuration - Garmin GI 275 Maintenance Manual

8. A system message will appear alerting the user that SVT has been enabled.
9. Restart all GI 275s for the enablement to take effect.
2.3.5 Summary
A configuration summary can be saved to a USB drive by touching the Save Summary button. The file
will detail configuration settings for all GI 275s in the system and can be viewed on a computer web
browser.
NOTE
Files will be saved to a "aircraft_cfg" folder on the USB drive.
2.3.6

Import Configuration

Configuration settings can be imported via USB using the following procedure:
1. Power on the GI 275 and all LRUs in the system in Configuration mode.
2. Insert the USB drive containing the configuration files into the USB dongle or GSB 15 (if
installed).
3. Navigate to SW/Config → Config Options.
4. Touch the Import Configuration button.
5. Touch the Select Files button and select the configuration file to be imported.
6. Touch the Select Configuration button.
7. Select the applicable configurations and then touch the Back button.
8. Touch the Import Config ( ) button and then touch the Start button.
2.3.7

Export Configuration

Configuration settings can be exported via USB using the following procedure:
1. Power the GI 275 and all LRUs in the system on in Configuration mode.
2. Insert a USB drive into the USB dongle or GSB 15 (if installed).
3. Navigate to SW/Config → Config Options.
4. Touch the Export Configuration button.
5. Touch the Select Name button and enter a name for the saved file.
6. Touch the Export Config button.
7. The GI 275 will display "Complete" with the export is finished.
NOTE
Files will be saved to a "aircraft_cfg" folder on the USB drive.
190-02246-C2
Rev. 3
GI 275 Part 27 AML STC Maintenance Manual
Page 2-9