Download Print this page

ICI 840121412876 Installation & Use

Alumilite step toyota 4runner

Download this manual

Alumilite Steps

part# 840121412876

DIRECTIONS FOR INSTALLATION & USE

2010-2021 TOYOTA 4RUNNER

(excludes models: 2010-2013 SR5, 2010-2021

Limited, 2019-2021

Nightshade edition, or any models with lower

cladding/lower rocker panel extensions)

For technical support,

call 1-800-626-8746 or email sales@icionline.com

visit icionline.com to download instructions

WARNING: FAILURE TO COMPLY WITH INSTALLATION,

SAFETY, AND PRODUCT USE INSTRUCTIONS MAY RESULT IN

SERIOUS BODILY INJURY OR DEATH.

IMPORTANT NOTES

The contents of this installation and operation manual should be

read and comprehended before initializing the installment of the

above listed product. This will help minimize risk to injury through

the installation process and through the operation of the product.

TABLE OF CONTENTS

SAFETY, WARNINGS, AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02

2. PARTS AND TOOLS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03

3. ICI STEP INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 04-07

4. SOCIAL MEDIA REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07

Page 1 3. ICI STEP INSTALLATION........
Page 2 PARTS AND TOOLS REQUIRED SAFETY, WARNINGS, AND OPERATION Hardware Kit includes: Components List: Please ensure that the installer and end-user of this product have • (1). Qty x 16 = M8 x 35mm Hex (a). Side Bars - Qty x 2 familiarized themselves with the contents in this manual.
Page 3 ICI STEP INSTALLATION ICI STEP INSTALLATION Step 4 (Bolt Middle Step 1 (Prep) Bracket to Bar) Beginning on the Driver's side, Start by bolting the middle remove any steps if equipped. bracket (100528) to the bar. Next, locate the 3 sets of...
Page 4 ICI STEP INSTALLATION ICI STEP INSTALLATION STEP 10 (Finish) STEP 7 (Bolt Bar to Rear Bracket and Check all hardware and make sure they are fully Hoop Step) tightened. Reference Repeat steps 5 and 6 for the diagram on page 3 for rear bracket and hoop step.