Advertisement
Quick Links
Alumilite Steps
part# 840121412920
DIRECTIONS FOR INSTALLATION & USE
2019-2021 CHEVROLET SILVERADO 1500 ;
2020-2021 CHEVROLET SILVERADO 2500/3500; 2019-2021
GMC SIERRA 1500 ;
2020-2021 GMC SIERRA 2500/3500;
CREW CAB (FULL 4-DOOR)
For technical support,
call 1-800-626-8746 or email sales@icionline.com
visit icionline.com to download instructions
WARNING: FAILURE TO COMPLY WITH INSTALLATION,
SAFETY, AND PRODUCT USE INSTRUCTIONS MAY RESULT IN
SERIOUS BODILY INJURY OR DEATH.
IMPORTANT NOTES
The contents of this installation and operation manual should be
read and comprehended before initializing the installment of the
above listed product. This will help minimize risk to injury through
the installation process and through the operation of the product.
TABLE OF CONTENTS
SAFETY, WARNINGS, AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
1.
2. PARTS AND TOOLS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
3. ICI STEP INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 04-07
4. SOCIAL MEDIA REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07
Advertisement
Related Manuals for ICI Alumilite Steps 840121412920
Summary of Contents for ICI Alumilite Steps 840121412920
- Page 1 3. ICI STEP INSTALLATION........
- Page 2 SAFETY, WARNINGS, AND OPERATION PARTS AND TOOLS REQUIRED Hardware Kit includes: Components List: Please ensure that the installer and end-user of this product have • (1). Qty x 16 = M8 x 30mm Hex (a). Side Bars - Qty x 2 familiarized themselves with the contents in this manual.
- Page 3 ICI STEP INSTALLATION ICI STEP INSTALLATION Step 4 (Bolt 2nd Step 1 (Prep) bracket to Bar) Beginning on the Driver's side, Start by bolting the middle remove any steps if equipped. bracket to the bar. It is the Next, locate the 4 sets of 3rd bolt hole from the front.
- Page 4 ICI STEP INSTALLATION ICI STEP INSTALLATION STEP 7 (Bolt Last STEP 10 (Finish) Middle Bracket to Bar Check all hardware and make sure they are fully and Rear Hoop Step) tightened. Reference Next, bolt the last middle bracket diagram on page 3 for (3rd from front) to the bar and rear hardware locations.