PARTS AND TOOLS REQUIRED SAFETY, WARNINGS, AND OPERATION Hardware Kit includes: Please ensure that the installer and end-user of this product have • familiarized themselves with the contents in this manual. This (1). Qty x 16 = M8 Finish Washers manual provides important information about the possible safety and operation risks that are involved with the usage of this (2).
REFERENCE DIAGRAM ICI STEP INSTALLATION Step 1 (Prep) DRIVER SIDE example Beginning on the Driver's side, below: remove any steps if equipped. Next, locate the 3 sets of mounting points on the underside of the vehicle. Please note that your vehicle...
Page 4
ICI STEP INSTALLATION ICI STEP INSTALLATION Step 4 (Bolt Middle STEP 7 (Bolt Rear Bracket to Bar and Hoop Step to Bar Front Hoop Step) and Rear Bracket) Bolt the front hoop step to the bar Repeat steps 4 and 5 for the and middle bracket (100530).
Page 5
ICI STEP INSTALLATION STEP 10 (Finish) Check all hardware and make sure they are fully tightened. Reference diagram on page 3 for hardware locations. Repeat Steps 1-10 for the Passenger Side. Figure 10. AMAZING! Drop us a Review! You have successfully completed the installation of your new Alumilite steps.