Advertisement
Quick Links
Alumilite Front Bumper
part# AL-FBM71TYN-RT
DIRECTIONS FOR INSTALLATON & USE
2014 - 2021 TOYOTA 4RUNNER
For technical support, call 1-800-626-8746
visit icionline.com to download color instructions
WARNING: FAILURE TO COMPLY WITH INSTALLATION,
SAFETY, AND PRODUCT USE INSTRUCTIONS MAY RESULT
IN SERIOUS BODILY INJURY OR DEATH.
IMPORTANT NOTES
The contents of this installation and operation manual should be
read and comprehended before initializing the installment of the
above listed product. This will help minimize risk to injury through
the installation process and through the operation of the product.
TABLE OF CONTENTS
1. SAFETY, WARNINGS, AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
2. PARTS AND TOOLS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
3. REFERENCE DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .04
4. DISMOUNTING THE OEM BUMPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05-10
5. ICI BUMPER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14
6. SOCIAL MEDIA REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
or
Advertisement
Related Manuals for ICI AL-FBM71TYN-RT
Summary of Contents for ICI AL-FBM71TYN-RT
- Page 1 5. ICI BUMPER INSTALLATION ........
- Page 2 SAFETY, WARNINGS, AND OPERATION PARTS AND TOOLS REQUIRED Hardware Kit includes: Please ensure that the installer and end-user of this product have • familiarized themselves with the contents in this manual. This (1). Qty x 14 = M8-1.25 x 30mm Flat Head Socket Screws manual provides important information about the possible safety and operation risks that are involved with the usage of this (2).
- Page 3 REFERENCE DIAGRAMS DISMOUNTING THE OEM BUMPER Front view of Bumper STEP 1 and Winch Carrier set-up: Open the hood of your 4Runner and remove the top plastic radiator cover by removing the 10 plastic retainer clips. Simply push in the center of the clips (like a button) to disengage them.
- Page 4 Remove the plastic skid plate. the frame. The crash bar will Figure 6 is with the plate not be used for the ICI removed. Figure 9. Figure 6. bumper.
- Page 5 STEP 10 as line and down the valleys of a guide, trace a line with a the bumper cover. The ICI sharpie over the tape to act bumper will cover these cut as a “cutting” line. Once the...
- Page 6 DISMOUNTING THE OEM BUMPER ICI BUMPER INSTALLATION STEP 16 STEP 19 Clean up the edges with a light Install the ICI winch carrier to sanding and remove all the the frame of the vehicle. With masking tape. help, carefully hold the winch...
- Page 7 ICI BUMPER INSTALLATION ICI BUMPER INSTALLATION STEP 25 STEP 22 Attach the provided rubber Install the side support trim to the length of the side brackets to the winch carrier edges of the cover plate. It with the provided M8 may be necessary to use a hardware.
- Page 8 ICI BUMPER INSTALLATION STEP 28 (Finish) Check all hardware and make sure they are fully tightened. Figure 28. TAG ICI ON SOCIAL MEDIA www.facebook.com/InnovativeCreationsInd www.instagram.com/ici_usa Hashtags: #ICIUSA #ICIAlumilite #AlumiliteSteps #AlumiliteBumpers...