Advertisement
Alumilite Steps
part# 840121412937
DIRECTIONS FOR INSTALLATION & USE
2001- 2018 CHEV/GMC Silverado/Sierra 1500
& 2001-2019 Chevrolet/GMC Silverado/Sierra
2500/3500
CREW CAB (FULL 4-DOOR)
Works with Diesel DEF Tanks
For technical support,
call 1-800-626-8746 or email sales@icionline.com
visit icionline.com to download instructions
WARNING: FAILURE TO COMPLY WITH INSTALLATION,
SAFETY, AND PRODUCT USE INSTRUCTIONS MAY RESULT IN
SERIOUS BODILY INJURY OR DEATH.
IMPORTANT NOTES
The contents of this installation and operation manual should be
read and comprehended before initializing the installment of the
above listed product. This will help minimize risk to injury through
the installation process and through the operation of the product.
TABLE OF CONTENTS
Safety, Warnings, And Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
1.
2. PARTS AND TOOLS REQUIRED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
4. REFERENCE DIAGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . .. 04-08
5. ICI STEP INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 09-12
6. SOCIAL MEDIA REFERENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Advertisement
Table of Contents
Related Manuals for ICI Alumilite Steps 840121412937
Summary of Contents for ICI Alumilite Steps 840121412937
- Page 1 5. ICI STEP INSTALLATION........
- Page 2 SAFETY, WARNINGS, AND OPERATION PARTS AND TOOLS REQUIRED Hardware Kit includes: Please ensure that the installer and end-user of this product have • familiarized themselves with the contents in this manual. This (1). Qty x 1 = M8 x 40mm Hex Head Bolts manual provides important information about the possible safety and operation risks that are involved with the usage of this (2).
- Page 3 REFERENCE DIAGRAM REFERENCE DIAGRAM Passenger Front Bracket set-up (2-piece bracket) DRIVER SIDE example Accomodates DIESEL DEF TANK below: Use for both Gas and Diesel models Front: If truck has pre- welded nut, use (1) long M8 x 40mm bolt. Otherwise, use T-bolt Rear: PASSENGER SIDE Front:...
- Page 4 REFERENCE DIAGRAM 01-06 Classic Body Only REFERENCE DIAGRAM 01-06 Classic Body Only Retro Bracket fit instructions only for 2001-2006 Classic Chev/GMC models. -Drilling required for the last 2 brackets on both the Driver and Passenger side (100545 and 100544) -The 2001-2006 models did not come with pre-drilled holes in these locations.
- Page 5 ICI STEP INSTALLATION REFERENCE DIAGRAM (Set-up for U-Clip Nuts) Bracket set-up tips for all vehicles Step 1 (Prep) -Each bracket has 2 mounting points on the truck, one in the inner Beginning on the passenger rocker panel and one in the pinch-weld . Note that the holes are side, remove any steps if vertically aligned.
- Page 6 ICI STEP INSTALLATION ICI STEP INSTALLATION Step 7 (Bolt Mid-Rear Step 4 (Hang bar Bracket to Bar and on Brackets) Rear Hoop Step) Next, locate the passenger side Bolt the Mid-Rear bracket (100545) bar. The three holes on the front to the Bar and rear hoop step.
- Page 7 ICI STEP INSTALLATION STEP 10 (Finish) Check all hardware and make sure they are fully tightened. Reference diagram on page 4 for hardware locations. Repeat Steps 1-10 for the Driver Side. Note that the Driver side front bracket (100544) is the same as the Mid-Front and Rear brackets (100544).
Need help?
Do you have a question about the Alumilite Steps 840121412937 and is the answer not in the manual?
Questions and answers