Silvercrest SSMS 600 E6 Operating Instructions Manual page 14

Hand blender set
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
Under no circumstances may the motor unit 4 be cleaned by immersing it in
water or holding it under running water.
WARNING! RISK OF INJURY!
Handle the extremely sharp blade 7 with caution as it can cause injuries.
Reassemble the liquidiser after use and/or cleaning so that you do not
injure yourself on the exposed blade 7.
Keep the blade 7 out of the reach of children.
NOTICE
WARNING! PROPERTY DAMAGE!
Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 0 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the hand blender 5, the bowl lid 6, the bowl 8 with lid 9, the
whisk q, the measuring beaker w with combined lid/base
blade 7 thoroughly in soapy water and then rinse off the soap with fresh
water. Rinse off any remaining detergent afterwards with fresh water.
4) Dry everything well with a dish towel and ensure that the appliance is com-
pletely dry before re-use.
SSMS 600 E6
The measuring beaker w with combined lid/base
bowl 8 with lid 9 and the blade 7 are dishwasher-safe.
, whisk q,
a
a
and the
GB │ IE
 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

407710-2207

Table of Contents