Steam Clean; Self Clean; Delay - Sharp SSR3065JS Operation Manual

30" slide-in electric range
Hide thumbs Also See for SSR3065JS:
Table of Contents

Advertisement

STEAM CLEAN

CAUTION
BURN HAZARD
• Use caution to avoid contact with hot surfaces. Oven surfaces,
especially the oven bottom, may be hot.
• Hot surfaces may create steam in a wet sponge or cloth. If
steam occurs when wiping the oven, allow the oven to cool
slightly before wiping.
Steam Clean mode is designed to gently warm oven surfaces to
create steam and loosen grease and light soils.
TO STEAM CLEAN
1 Start with a cool oven and remove all items from inside,
including oven racks. Wipe out any large spills or excess
debris. Scrape off and remove any burnt-on debris with a
stiff plastic utensil, such as a hard plastic spatula or plastic
paint scraper. To soften tough stains, spray inside surfaces
with water or wipe with a wet sponge before using Steam
Clean mode.
2 Pour 1 cup (8 oz) water in the center bottom of the oven and
close the door.
3 Touch Steam Clean pad. Touch START/ENTER pad. The
door does not lock during a Steam Clean cycle. Do not open
the door until the Steam Clean cycle is complete.
4 When the Steam Clean cycle is complete, soak up any water
in the oven bottom and wipe down interior surfaces with a
soft, nonabrasive sponge or cloth. Touch STOP/CLEAR
pad to exit.

SELF CLEAN

WARNING
FIRE AND BURN HAZARDS
• Before starting a Self Clean cycle, ensure oven is empty.
Remove broiler pan, racks, cookware and any other materials
and remove excess grease or food from inside the oven to
avoid risk of ignition.
• Self Clean mode uses very high oven temperatures capable of
reducing stubborn oven spoils to ash that can be easily wiped
out once the oven is cool. The door locks several minutes after
the start of a Self Clean cycle. If the door is opened before it
locks, the Self Clean cycle is canceled. If the door does not
lock within 15 minutes, cancel Self Clean and contact an
authorized servicer for repair.
NOTES:
• Due to the high temperatures, it is advisable to use Self Clean
mode during cooler weather to avoid unnecessarily burdening
the home air conditioning system.
• Self Clean can be set to run for 3, 4 or 5 hours. Shorter times
use less energy, but longer times allow for more thorough
cleaning.
• 3-, 4- and 5-hour cycles do not include cooling time. Allow
an additional 60 to 90 minutes for the door to unlock.
• During Self Clean, do not use the rangetop. It is not safe to
operate any part of the appliance during a Self Clean cycle.
TO SELF CLEAN
1 Start with a cool oven and remove all items from inside,
including oven racks. Wipe out any large spills or excess
debris.
2 Touch Self Clean pad. Use the numeric pad to select the
number of hours of the Self Clean cycle.
3 Touch START/ENTER pad. The oven door is locked during
a Self Clean cycle.
4 When the oven has unlocked and cooled completely, wipe out
any ashy residue with a damp, nonabrasive sponge or cloth.
Touch STOP/CLEAR pad to exit. If a Self Clean cycle is
canceled prematurely, the oven remains locked until it has
cooled sufficiently.

DELAY

CAUTION
FOODBORNE ILLNESS HAZARD
• Foods that spoil easily, such as milk, eggs, fish, stuffing,
poultry and pork, should not be allowed to sit for more than
1 hour before cooking. Spoilage may occur sooner if oven
is warm.
The Delay function allows you to delay the start of a baking
operation until a specified time.
NOTES:
• Once Delay has been set, it cannot be modified. To set a
different Delay start time, oven operation must be canceled
and restarted.
• Delay cannot be used with Pizza or Broil modes.
• Delay start time cannot be set more than 12 hours in advance.
TO DELAY OVEN OPERATION
1 Select oven baking mode according to previous directions.
2 Touch Delay pad. The clock will begin to flash, indicating
the start time can be entered.
3 Use the numeric keypad to set the start time. Touch Delay
pad to toggle between AM and PM.
4 Touch START/ENTER pad. Place food in the oven.
5 Between time of entry and set Delay start time, the clock on
the display will alternate between the time of day and set
Delay start time.
DELAY START
whenever the Delay function is set.
6 When the Delay start time is reached, an alert sounds to
indicate the oven is starting.
21
OVEN USE
will appear above the clock
E

Advertisement

Table of Contents
loading

Table of Contents