Installing The Aec-6280 Ide Adapter - Acard Ultra ATA-133 AEC-6280 User Manual

2.2 Installing the AEC-6280 IDE Adapter

Step 1. Turn off the computer.
Step 2. Plug out the power core and all the
connection of external devices
from your system.
Step 3. Referring your original case user's
manual to see how to open your
case.
Step 4. Select one unused PCI expansion
slot of your computer. Unscrew
the slot cover and remove it.
Step 5. Remove the IDE host adapter from the anti-static bag and hold its
metal bracket part.
Step 6. Plug the AEC-6280 IDE adapter card into the unused PCI slot with
care on the bottom of edge. Then fit the adapter bracket on case
frame just like a slot cover.
! ! ! ! ! When two hard drives connected with ACARD AEC-6280 at
the same IDE port (i.e.on same cable), the hard drives Jumper
setting must be set as a respectively positioning "Master" and
a "Slave" on the hard drives. The two hard drives could not
be set on both "Master" nor both "Slave" on the same cable.
! ! ! ! !
For the hard drive or ATAPI device Jumper setting (Master
/ Slave), refer to hard drive or ATAPI device User Manual.
! ! ! ! !
In order to achieve best performance, use same hard drive
model, ex. Ultra ATA 66, Ultra ATA 100 or Ultra ATA 133
hard drive.
7
ACARD AEC-6280
PCI slot