Table of Contents
Advertisement
ACARD AEC-6280
4.1.5 Windows XP (Beta Version) Environment
Driver installation is required when it is the first time to setup Windows XP
(Beta Version) into the System
For Boot Device
AEC6280.SYS is designed for Microsoft Windows XP (Beta Version)
miniport drivers. It allows driver connected to IDE devices (which support
by Microsoft)
1. Insert Windows XP (Beta Version) boot disk and boot from floppy disk.
(If boot from CD-ROM or install from hard disk, please press
"F6" for the first booting screen)
2. Follow the Windows XP (Beta Version) setup procedures.
3. Press "S" to specify additional SCSI adapter.
4. Move the highlight bar to "the other" and press "Enter".
5. Before the installation, copy the AEC-6280's driver into a floppy diskette
first. Then insert the ACARD AEC-6280 driver disk into the floppy.
6. The ACARD Miniport driver should be highlighted at this stage. Press
"Enter" to proceed.
7. Windows XP (Beta Version) should now recognize the ACARD
Miniport driver and the IDE hardware. Please follow the Microsoft
Windows XP (Beta Version) installation.
Install Driver for Windows XP (Beta Version)
After Windows XP (Beta Version) has been installed, you may wish to plug
the ACARD AEC-6280 device on the Windows XP system (Beta Version).
Before plug in AEC-6280, follow the procedures to install driver manually.
28
Advertisement
Table of Contents
