Table of Contents
Advertisement
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
first programme on the top right of
the programme dial is Eco 40-60, the
programme to which the information
of the energy label relates.
The indicator of Mode - Wash button
illuminates.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
.
11.6 Starting a programme
Touch the Start/Pause
the programme. It is not possible to start
the programme when the indicator of the
button is off and doesn't flash (e.g. the
door is open).
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
11.7 Starting a programme with
the delay start
1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. The related
indicator comes on.
2. Touch the Start/Pause
The appliance door locks and starts
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start button
3. Touch the Start/Pause
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start button
button to start
3. Touch the Start/Pause
11.8 The SensiCare System
load detection
After touching the Start/Pause
button, the SensiCare System starts the
laundry load detection:
1. The appliance detects the load in the
2. The programme duration will be
button.
the countdown of the delay start. The
display shows the indicator
pause the appliance. The related
indicator flashes.
repeatedly until the display shows .
again to start the programme
immediately.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows the
desired delay time.
again to start the new countdown.
The programme duration in
the display is referred to a
medium/high load.
first 30 seconds. During this phase
the Time Manager bars
below the time digits play a simple
animation, the drum rotates shortly.
adjusted accordingly and could
increase or decrease. After further 30
seconds, the water filling starts.
ENGLISH
33
.
button to
button
button to
button
placed
Advertisement
Table of Contents
