Table of Contents
Advertisement
y
x
y
16-22 mm
Ø 35 mm
12,5 - 14 mm
595-598 mm
max. 105°
Cupboard door preparation
Align the cupboard door to the furniture
correctly.
Measure the distance X to fix the height of
the hole to countersink the upper hinge. The
centre of the hole Y should be at the same
height of the stroke on the hinge support.
Set the position of the lower hole respecting
dimensions and distances shown in the
drawing (449 mm).
Countersink the holes.
449
mm
22±1,5 mm
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth 12.5 - 14 mm
depending on the depth of cupboard door) on
the inner side of the door.
The hinges will be fixed to the door by means
of the four supplied screws A.
A
For countersinking the door, it
is recommended to call a
professional.
To align the door perfectly,
make sure that the edge of
cupboard door is parallel with
the appliance edge and to
respect the proper opening
angle (max. 105 °).
ENGLISH
17
Advertisement
Table of Contents
