Vaillant VR 92/3 Operating And Installation Instructions page 28

Remote control address:
Software version
Change code
Language, display
Language:
Display brightness:
Dimmed displ. brightness:
Offset
Room temperature: K
Factory settings
28
Each remote control has a unique address,
starting with Address 1. For each additional
remote control, the address increases continu-
ously.
Defining an individual access code for the in-
staller level
Defining the language that is to be shown on
the display.
Brightness during active use.
Brightness in standby.
Comparison of the temperature difference
between the measured value in the system
control and the value for a reference thermo-
meter in the living room.
The remote control resets all of the settings to
the factory settings and calls up the installation
assistant.
Only the competent person can operate the
installation assistant.
Operating and installation instructions 0020287935_02