Advertisement
Step 6: Cable Management
1. Adjust the swivel using the 5mm Hex Key (F) at position 1. Adjust the tilt by using the 5mm Hex Key (F) at position 2.
2. Attach the Cable Clips (12) after organizing the cables with adequate slack for the full range of motion of the Monitor Arm.
Safety Precautions
•
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young
children. Please ensure all instructions are read and completely understood before attempting installation. If you are
unsure of any part of this installation, please contact a professional installer for assistance.
•
The desk or mounting surface must be capable of supporting the combined weight of the Monitor Stand and
monitors, otherwise the structure must be reinforced. To ensure optimal performance, check for any loose screws
every two months.
•
This product was designed to be installed onto a tabletop. Before installing, make sure the mount will support the
combined load of the mount and display. Never exceed the maximum load capacity of 20 lbs. per arm or this may
result in product failure or personal injury.
•
This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal
injury.
WARNING –
This product contains high pressure gas spring parts, please do not put it into fire, high
temperatures, or disassemble it, which will lead to unexpected personal injury. Defective products can be sent
back to the manufacturer or handed over to professional institutions. To ensure the sealing performance of the gas
spring, we recommend that the arm is moved through its full range of motion at least once a month to maintain its
long term functionality.
Have any queries? Our expert engineers are here to help!
sales@progressivedesk.com
1-800-828-9414
progressivedesk.com
P a g e | 8
Advertisement
