Related Manuals for CABINETS TO GO Findley & Myers CB33
Summary of Contents for CABINETS TO GO Findley & Myers CB33
- Page 1 Lazy Susan Cabinet ASSEMBLY INSTRUCTIONS These assembly instructions are only applicable for all base reach Lazy Susan ITEM# CB33, CB36 Page 1...
-
Page 2: Required Tools
► General Instructions: Thank you for purchasing a Cabinets To Go product. You are now the proud owner of a high quality product designed to face the test of daily use and guaranteeing your enjoyment for many years to come. Carefully read the instructions before starting the installation. During assembly, please follow all generally accepted safety procedures. Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any responsibility for any damages caused. Any installation which does not correspond to the instructions may result in defects, malfunctioning parts, significant damage and/or injury. Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist. Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling location. Cabinets To Go will not be held responsible for failure to follow these instructions. PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE QUANTITIES MENTIONED BELOW. - Page 3 Instructions: ► Assembling the Door Set: Place two doors (J1&J2) on a flat surface and align them from the pilot holes. (Note: If the doors are already Attach them together using the invisible hinge sets (f) and the provided screws, and set aside. assembled, please continue to Step 2) Qty 2 Sets...
- Page 4 Place the Right Side Panel (B2) and align the cam lock connectors with right rear side panel. ( Figure 8) Lock the cam lock connectors. Place the Short Frame (A2) and align the cam lock connectors with the side panel (B2) and frame (A1) and lock the cam lock connectors. Figure 8 Place and attach door assembly (J) from Step 1 onto face frame (A2) using door hinges (g) and screws (d) (Figure 9) Attach the short toe kick (H2) to long toe-kick (H1) with cam locks, then put onto the cabinet under the door.
- Page 5 ►Maintenance For daily cleaning, use a dry cloth and a soft liquid cleaner. Never use abrasive cleaners containing acetone, chlorine or strong bleach. Also, do not use tools as scrapers, metallic brushes, and other products which can scratch or tarnish surfaces. Under no circumstances should you use chrome cleaner on chrome-plated or brass trim, hinges, handles, sockets etc.