Product Information; Declaration Of Conformity; Information About Your Product On The Internet; Display Of Energy Data - Bosch Condens 8300i W Operation Manual

2

Product Information

2.1

Declaration of conformity

The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: www.bosch-climate.com.au.
2.2

Information about your product on the Internet

We want to actively provide you with suitable information about your
product relevant to your situation. We therefore recommend you use the
information provided on our web pages. You can find the Internet
address on the back of these instructions.
2.3

Display of energy data

Energy data displayed at a connected accessory, e.g. control unit
(remote control) is based on an estimate using the internal appliance
data.
Many factors affect the energy consumption in real life conditions. This
means that the energy data displayed may deviate from the values
displayed by an energy meter.
These values only serve to visualise the energy consumption and to
perform relative comparisons on different days/weeks/months.
They are not suitable to be used as the basis for billing.
Condens 8300i W – 6721841532 (2022/05)
3

Operation

These operating instructions describe the operation of the wall mounted
gas condensing boiler. Depending on the heating controller, the
operation of several functions may deviate from the description.
Observe the operating instructions for the heating controller used.
3.1

Turn unit on/off

Fig. 1 On/Off-switch
Switching on
▶ Switch the appliance ON using the ON/OFF switch.
When and the flow temperature appear alternately on the display,
the device remains in heating mode at the lowest heat output for
15 minutes to fill the condensate trap in the device.
Stop
NOTICE
Risk of damage to the system from frost!
The heating system can freeze up after a prolonged period (e.g. during a
power failure, switching off the power supply, faulty fuel supply, boiler
fault etc.).
▶ Ensure that the heating system is in constant use (particularly when
there is a risk of frost).
The anti-seizing function is not active when the device is switched off.
The anti-seizing function prevents the heating pump and the 3-way valve
from seizing up following long periods of inactivity.
▶ Switch off the device using the On/Off switch ( Fig 1).
Product Information
0010034884-001
5