Table of Contents
Advertisement
Product Information
H Danger of death from poisoning by flue gas due
to inadequate combustion
Danger of death due to flue gas leak. If flues are
damaged or leaking, or if you smell flue gas, observe
the following rules.
▶ Close the fuel infeed.
▶ Open doors and windows.
▶ If necessary, warn all residents and leave the
building.
▶ Prevent third parties from entering the building.
▶ Rectify any damage to the flue gas pipe
immediately.
▶ Check the combustion air supply.
▶ Do not cover or reduce the size of ventilation
openings in doors, windows and walls.
▶ Ensure that there is adequate combustion air
supply, including for any appliances installed at a
later date, e.g. extractor fans, kitchen fans or air
conditioning units that discharge air to the outside.
▶ Never operate the device if there is insufficient
combustion air supply.
H Combustion/room air
▶ Keep the combustion/ambient air free of corrosive
substances (e.g. halogenated hydrocarbons that
contain chlorine or fluorine compounds). This will
help to prevent corrosion.
▶ Keep the combustion air supply free of dust.
H Installation, commissioning and maintenance
Installation, commissioning and maintenance may be
performed only by an approved contractor.
▶ In the case of open flue operation: ensure that the
installation location meets the ventilation
requirements.
▶ Do not repair, manipulate or deactivate safety-
relevant components.
▶ Only install original spare parts.
▶ Check for gas tightness after working on gas-
carrying components.
H Handover to the user
When handing over, brief the owner in the operation of
the heating system and about the operating
conditions.
▶ Explain operation – with particular emphasis on all
safety-related actions.
▶ Highlight the following points in particular:
– Point out that modifications or repairs may be
carried out only by an approved contractor.
– To ensure safe and environmentally compatible
operation, an annual inspection, and also
4
cleaning and maintenance as required, must be
carried out within the specified interval.
▶ Point out the possible consequences (material
damage, personal injury and possible danger to life)
of not carrying out inspection, cleaning and
maintenance correctly, or omitting it altogether.
▶ Draw attention to the dangers associated with
carbon monoxide (CO) and recommend the use of
CO detectors.
▶ Hand over the installation and operating
instructions to the user for safekeeping.
H Inspection and maintenance interval
To ensure the wall mounted gas condensing boiler
works correctly and safely, the following intervals
must be adhered to:
• Inspection: annually,
• Maintenance: every 2 years or following a burner
runtime of 4000 hours (depending on which occurs
first).
2
Product Information
2.1
Declaration of conformity
The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk.
2.2
Product data for energy consumption
The product data on energy consumption can be found in the operating
instructions for the user.
2.3
About these instructions
Figures used
The figures in these instructions serve to provide general notices
regarding correct operation. The figures used serve to provide general
notices regarding correct operation. These figures may slightly deviate
from the actual situation.
Product types mentioned
These instructions describe all product types of the GC7000WP.
Availability may vary depending on the country.
Condens 7000 WP – 6721841195 (2022/01)
Advertisement
Table of Contents
