Care And Maintenance; Replacement Parts List - Heatmaxx ET-F-003-A1 Manual

Hide thumbs

Table Of Contents

Table of Contents

Observe Flame Height When Lit: The burner will display blue and yellow flames. These flames should be a blue /

yellow color between 1~2 in. height, (see Figure 12). These flames should not be yellow or produce thick smoke.

This would indicate an obstruction of airflow through the burners. The flames should be blue with straight yellow tops.

To enjoy the outstanding performance from your fire pit, make sure you perform the following activities on a regular

basis:

1. Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.

2. While cleaning the fire pit, make sure to keep the area around the burner dry at all times. DO NOT submerge the

control valve assembly. If the gas control is submerge in water, DO NOT use it. It must be replaced.

3. Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible

blockage include:

(1). Gas odor with extreme yellow tipping of flame.

(2). Fire pit does NOT reach the desired temperature.

(3). Fire pit flame is excessively uneven.

(4). Fire pit makes popping noises.

(5). Spiders and insects can nest in burner or orifice. This dangerous condition can damage fire pit and render it

unsafe for use. Clean burner holes by using a heavy-duty pipe clearer. Compressed air may help clear away

small particles.

4. Carbon deposits may create a fire hazard. Clean burner with warm soapy water if any carbon deposits develop.

5. Cover your fire pit with an outdoor weather cover when not in use to protect it from the elements.

NOTE: Always allow fire pit to cool COMPLETELY before you cover the fire pit with an outdoor weather cover or you

attempt to service or perform maintenance.

F170185-A-FT

F170185-A-WC

ET-LR-4.18

F200083-A1-T

CLTN-PLSELT

FM-HSASML

ET-E3-300

Good

Light Blue