Installing The Driver Software; Updating The Driver Software - Broadcom 440X User Manual

Back to Contents Page
Windows Driver Software: Broadcom 440X
10/100 Integrated Controller User Guide

Installing the Driver Software

Updating the Driver Software

Viewing or Changing the Properties of the Controller
Setting Power Management Options
Removing the Driver Software
Installing the Driver Software
When Windows first starts after a new hardware device (such as a Broadcom Ethernet controller) has
been installed, or after the existing device driver has been removed, the operating system
automatically detects the new hardware and prompts you to install the driver software for that device.
When the Found New Hardware Wizard starts, click Cancel.
NOTE: A network device driver must be installed before the Broadcom Ethernet controller can
be used with your Windows operating system. Drivers are located on the installation CD.
To install the driver software
1. Insert the installation CD in the CD-ROM drive.
2. Open the Drivers folder, which contains the Setup.exe file, and then double-click Setup.exe.
3. Click Next, and then click Yes to agree to the License Agreement.
Updating the Driver Software
To update the driver software
1. Start Windows and log on. You must have network administrator permissions to update the
driver software.
2. In Control Panel, click System to view System Properties.
3. Click the Hardware tab, and then click Device Manager.
4. Right-click the name of the Broadcom 440X 10/100 Controller, and then click Update Driver.