Using Silent Installation - Broadcom 440X User Manual

NOTES:
To prevent an error from occurring, type change user /install from the DOS command
prompt before installing the BACS2 software on a computer running Windows 2000
Advanced Server with Terminal Services.
Before you begin the installation, close all applications, windows, or dialog boxes.
Installing from the Installation CD
1. Insert the Installation CD into the CD-ROM drive.
2. Open the BACS folder on the Installation CD that contains the BACS2 Setup.exe file.
3. Double-click Setup.exe.
4. Click Next in Broadcom Management Programs Setup.
5. Read the license agreement, and then click Yes.
6. In Select Features, click the check box next to the feature(s) you want to install:
Control Suite. Installs Broadcom Advanced Control Suite 2.
CIM Provider. Installs CIM Provider.
7. Click Next, and then click OK at the end of the installation process.

Using Silent Installation

Before you perform the silent installation, copy the installation files to your hard disk to perform the
silent installation from the hard disk, rather than from the CD-ROM drive. Installing from the hard disk
is recommended because the setup /s command automatically generates a Setup.log file in the
directory from which it is run. If you perform a silent installation from the CD-ROM drive, a log file
cannot be generated, which causes the silent installation to fail.
To perform a silent installation
1. Copy the BACS folder on the Installation CD to your hard disk. This folder contains the BACS2
Setup.exe file
2. Change to the BACS directory.
3. From a command prompt, type setup /s, and then press ENTER.
Updating Broadcom Advanced Control Suite 2